| External Microphone |
| Includes | External Microphone
Warning label
Tamper resistant screws Installation instructions |
| Wiring requirements | 2 conductor shielded (with drain wire) 22 gauge stranded. Max cable length 1000’ |
| Caution | It is the responsibility of the installation company and end user to install this audio surveillance equipment in compliance with state and federal privacy laws. If you are unfamiliar with these laws, consult a qualified attorney. |
| Pickup Pattern | Omni-directional 25' pickup pattern |
| Pre-amplifier Type | Low noise MOSFET pre-amplifier |
| Gain Control | Adjustable gain |
| Output Level | Line level (0dbm) output |
| Frequency Response | 500Hz-16Khz Frequency response |
| Output Impedance | 100 Ohm unbalanced output |
| Power | 12VDC @ 20ma |
| S/N ratio | 60DB |
| Sensitivity | 44DB |
| Temperature range | 40 to 85C |
| Voltage Regulation & RFI Filtering | On-board voltage regulator and RFI filtering |
| Encapsulation | Potted electronics |
| IP Rating | IP67 rating |
| Housing | Powder coated, aluminum, tamper resistant housing |
| Color | Available in Black or White |
| Dimensions | L2.45" x W1.04" x H0.72" |
| Weight | 0.05bs |
