FAQ

In an ISS System, you work with many IP devices, and then a group of ISS services that provide many different features and functions. You will use ISS Client to use ISS System.

All of these services are configured using ISS Setup after logging into the ISS Admin service. Typically, you would want to limit which user groups can access these configurations using ISS Setup to change the recording schedule or event schedules.

IP cameras/video encoders using ISS protocol and ISS compatible DVRs are supported in ISS Systems. Also, ONVIF and 3rd party cameras are supported by ISS Admin service.

You can have only one ISS Admin service in one ISS System. No separate per channel License is required for ISS Admin service as long as you have an ISS Recording License.

Federation service: 11000

Admin service: 11001

Recording service: 11002

Streaming service: 11003

Monitoring service: 11004

Backup service: 11005

Video Wall service: 11006

Video Analytic service: 11007

Upgrade service: 10011

Video Wall agent service: 12000

DirectIP NVR keeps two copies of FW and NVR setup(configuration) images on its NAND memory. Usually, its first copy is used for normal operation.

Once in a while, NAND Flash Memory may fail, causing the unit to fail to boot up properly to load the Linux/NVR apps. When a DirectIP NVR detects 20 consecutive booting failures, it switches its active partition to the second copy to load the FW/setup properly. (It takes about 45sec for a full booting for DR-4/6100, DR-4/6200 series, so rebooting 20 failures will take about 15 min or so)

First, try pinhole reset and if the unit continues to reboot, wait about 15 min or so.

You can get the latest firmware from http://www.idisglobal.com/support/csdownload.

Please ask to techsupport@idisglobal.com if the release note of firmware is needed.

All NVR models that have an eSATA port are compatible with DA-ES1104.
IDIS provides 4 DA-ES1104 models. (DA-ES1104, DA-ES1104B, DA-ES1104C, DA-ES1104D)
Each model's compatibility varies. Please refer to Products > Accessories > External Storage

The HDD compatibility information can be checked in HDD Compatibility.
The path is Products > HDD Compatibility

DR-4200 and DR-62/6300 series NVRs support the RAID 1 for redundant data protection. In addition, DA-ES1104 (IDIS eSATA Storage) can be connected to the NVR for extending the recording storage capability.

The NVR access can be protected by various authority levels; the user can add various user levels, and change them different accessing authorities. 256 users and 64 groups can be registered with various authority levels.

Please refer to manuals at Download Center of www.idisglobal.com.

NVR DR-2/4/6/8000 series manual: Configuration > System Setup > User

On the NVR, go to Setup > System > User

Go to Settings > Network > General

Please refer to manuals at Download Center of www.idisglobal.com

NVR DR-2/4/6/8000 series Operation Manual(OM): Part 2 - Configuration > Camera >  Stream Ⅰ

Go to Setup > Camera > StreamⅠ

The Bitrate varies depending on ips and resolution.

Please refer to manuals at Download Center of www.idisglobal.com

NVR DR-2/4/6/8000 series Operation Manual(OM): Part 2 - Configuration > FEN

The content for FEN configuration in any IDIS NVR manual is applied for all the IDIS NVR series.

 Go to Settings > Network > WAN > Use UPnP

Go to Camera Registration > Scan > Third Party Scan

IDIS is providing various applications to support each type of mobile phone.
There are mobile apps for iPhone, android and window phone.
Apps can be found by “idis mobile” as a searching string.
IDIS Mobile supports many features of live, play, alarm control, etc

Privacy masks is a feature that masking some area where the user doesn’t want to show.
The masked area will not be shown in either live mode or playback. These areas don’t contain any image data. Only black boxes can be seen on the screen.
Up to 16 areas for privacy masking can be set on the image.